The circular economy is a model that keeps materials and products in use for as long as possible, instead of following the traditional “take, make, dispose” model. The National Center for Waste Management (MWAN) describes it as a key pillar for reducing waste generation at the source and turning waste into valuable resources.
For your facility, the circular economy is more than an environmental slogan: the waste you pay to send to landfills today could be a raw material someone else is willing to buy.
The Difference Between the Linear and Circular Economies
| Linear Economy | Circular Economy | |
|---|---|---|
| Process | Extraction ← Manufacturing ← Use ← Disposal | Design ← Use ← Repair and reuse ← Recycling ← Return as a raw material |
| Waste | The end of the line | A new resource |
| Resources | Depleted | Kept in circulation |
| Waste Destination | Landfill | Recycling or recovery, with landfill as the last resort |
The Waste Management Hierarchy: The Right Order
The circular economy means following a clear order for managing waste, from the most to the least preferred option:
- Prevention and reduction: Avoid generating waste in the first place.
- Reuse: Use the material again as it is.
- Recycling: Turn it into a raw material for a new product.
- Recovery: Recover energy or alternative fuel from it.
- Safe disposal: Use an engineered landfill as the last resort.
This order is not merely a recommendation. Article 5 of the Waste Management Law states that anyone carrying out a waste management activity must deliver the best environmental and economic outcomes according to the following priorities: recycling, then resource recovery, then safe disposal.
Where Is Saudi Arabia Heading? MWAN Targets
The National Center for Waste Management has built its strategy on circular economy principles. According to announcements made in November 2025:
- 22 strategic plans covering all regions of Saudi Arabia have been completed.
- The target is to divert 90% of waste from landfills by 2040.
- The actual diversion rate has increased from 5% to 18% so far.
- 500 investment opportunities have been developed, with a value exceeding SAR 750 billion and more than 76,000 jobs.
- An electronic waste transport document system has been launched to track waste.
The message for facility owners is clear: the direction is toward reducing the amount of waste sent to landfills, alongside closer oversight of waste tracking from its source to its final destination.
Recyclable Industrial Waste
| Waste | Common Source | Recycling Route |
|---|---|---|
| Plastic | Packaging, containers, and defective parts | Mechanical or chemical recycling |
| Paper and Cardboard | Packaging and shipping | Recycled paper mills |
| Metals and Scrap | Metal cutting and old equipment | Melting and remanufacturing |
| Used Oil | Equipment, vehicles, and generators | Re-refining |
| Tires | Transport fleets | Crumb rubber and construction materials |
| Batteries | Vehicles and power systems | Metal recovery |
| Electronic Waste | Devices and equipment | Precious metal recovery |
| Construction and Demolition Waste | Construction projects | Recycled aggregate |
| Organic Waste | Food factories and slaughterhouses | Composting or anaerobic digestion |
All these activities fall under the recycling facility permit issued by MWAN, which means that the recyclers you work with must be licensed.
The Regulatory Framework for Waste Recycling
- Waste Management Law (M/3, dated 5/1/1443 AH): No waste management activity may be carried out without a license or permit from MWAN.
- Recycling facilities require a permit from MWAN, in addition to an environmental permit from the National Center for Environmental Compliance.
- The violations schedule includes 97 violations, including those related to extended producer responsibility, the waste value chain, and contracting for waste management services.
Extended producer responsibility is a concept that makes producers responsible for their products even after their useful life ends, including their collection and recycling .
Waste Generator Duties Under the Law
If your facility generates waste, the law identifies you as a “waste generator.” Under Article 11, you must:
- Use materials and natural resources efficiently.
- Reuse products.
- Reduce waste.
- Store waste in designated areas in accordance with the requirements of the regulations.
- Sort waste suitable for reuse or recycling and place it in its designated areas after generation.
Three other articles directly affect your facility:
| Article | What It Means for Your Facility |
|---|---|
| 14 | Every producer and importer bears extended producer responsibility, with the applicable requirements defined by the regulations |
| 18 | If the carrier cannot deliver the waste to its approved destination, it must return the waste to you, and you become responsible for its treatment |
| 26 | Anyone who hands over waste to an unlicensed person becomes jointly and severally liable with that person for damage and compensation |
Article 29 provides for imprisonment of up to ten years and a fine of up to SAR 30 million, or either penalty, for anyone who stores, burns, or disposes of waste in a manner that harms public health or the environment. Burning waste in the factory yard is therefore not a low-cost solution.
How to Apply the Circular Economy at Your Facility: 7 Steps
- Inventory your waste: Identify its types, monthly quantities, and sources within the facility.
- Classify it: Hazardous, nonhazardous, and recyclable.
- Sort at the source: Provide separate containers for each recyclable waste type.
- Reduce at the source: Review the processes that generate the most waste.
- Contract with licensed providers: Use carriers and recyclers licensed by MWAN.
- Document: Record the quantities handed over, their destinations, and transport documents.
- Measure progress: Track the percentage of waste you divert from landfill each year.
Examples by Business Activity
Plastic or Packaging Factory
Defective parts and cutting scraps are clean and have a known material composition, making them the easiest factory waste to return to the same production line or sell to a licensed recycler. Sorting them by polymer type increases their value.
Food Factory
Organic waste is generated in large volumes, and its route is composting or anaerobic digestion through a licensed provider. Cardboard and packaging materials should be separated from it from the outset to prevent contamination.
Workshop or Transport Fleet
Used oil, tires, and batteries all have recycling routes, provided they are handed over to a licensed provider with documentation. Read Used Oil Management and Licensed Carriers.
Contractor
Steel, wood, and aggregate from construction and demolition waste can be separated on-site instead of being transported to landfill as mixed waste. Read Construction and Demolition Waste Management.
How Do You Measure Progress?
The clearest indicator is the landfill diversion rate:
Diversion rate = (Waste handed over for recycling or recovery ÷ Total waste) × 100
The data comes from the handover documents themselves, so the rate should not be calculated without documentation. Calculate it separately for each waste type, as the overall average can hide a type that has not improved.
Benefits of the Circular Economy for Your Facility
- Lower disposal costs: You do not pay to landfill waste that is recycled.
- Additional revenue: Some waste, such as metals and cardboard, has market value.
- Easier compliance: Organized, documented waste management makes inspections easier.
- A smaller carbon footprint: Reducing waste lowers Scope 3 emissions.
- An advantage in sustainability reporting: The landfill diversion rate is a key ESG indicator.
Common Mistakes
- Selling scrap to any buyer. If the buyer is not licensed, Article 26 makes you jointly responsible for what they do with it.
- Mixing waste. Oil-contaminated cardboard or plastic mixed with organic waste loses its value and may become hazardous waste.
- Prolonged storage in exposed areas. Storage outside designated areas is a violation and may create a fire or pollution risk.
- Missing documentation. Without transport and handover documents, you cannot prove that you handed over the waste in the first place.
- Assuming the recycler is licensed. Request the license and verify its scope before the first shipment.
Checklist Before Contracting with a Carrier or Recycler
- A valid MWAN license whose scope covers your waste type.
- Both the carrier and the recycler are licensed, not just one of them.
- The contract specifies the waste types, quantities, and destination for each type.
- A transport document for every shipment, with a copy kept in your records.
- A clear process for waste rejected upon receipt, because it will be returned to you.
- A periodic report of quantities actually recycled, allowing you to calculate the diversion rate.
How Can Abak Green Help?
We inventory and classify your facility’s waste, prepare a waste management plan with a recycling route for each type, and verify the licenses of transport and recycling providers. For those looking to establish a recycling facility, we prepare the environmental permit and MWAN permit application file.
Hazardous and Medical Waste Management · MWAN License Application Preparation · Recycling Centers · Request a Waste Management Plan
Frequently Asked Questions About the Circular Economy
What is the circular economy?
A model that keeps materials in use for as long as possible through reuse and recycling, rather than discarding them after a single use.
What is the difference between the circular and linear economies?
The linear economy ends with waste in a landfill, while the circular economy returns it to the production cycle as a resource.
What is Saudi Arabia’s waste recycling target?
MWAN aims to divert 90% of waste from landfills by 2040.
Do recycling companies need a license?
Yes. Recycling facilities need a permit from MWAN in addition to an environmental permit.
Which types of industrial waste are recyclable?
Plastic, paper, metals, used oil, tires, batteries, electronic waste, construction waste, and organic waste.
What is extended producer responsibility?
It makes producers responsible for their products after their useful life ends, including collection and recycling. Related violations are included in the violations schedule under the Waste Management Law.
Can scrap and recyclable waste be sold to any buyer?
No. Waste management activities require a license from MWAN, and anyone who hands over waste to an unlicensed person becomes jointly and severally liable with that person for damage and compensation.
Who is responsible if a carrier disposes of waste improperly?
The carrier is responsible for pollution resulting from transport, and the waste generator is jointly and severally liable with the carrier if the waste was handed over to an unlicensed provider. If the waste cannot be delivered to its destination, the carrier must return it to the generator.
What are the waste management priorities under Saudi law?
Recycling, followed by resource recovery, then safe disposal, according to Article 5 of the Waste Management Law.
Official Sources
- Technical Requirements for MWAN Licenses and Permits: Recycling Activities (Istitlaa Platform)
- Waste Management Law: MWAN
- Violation Classification Schedule: MWAN
- Akhbaar 24: The Comprehensive Strategic Plan and 90% Landfill Diversion
- Waste Management Law: Bureau of Experts at the Council of Ministers