An environmental site assessment is a systematic review of an industrial site's environmental condition before you buy or lease it: what activities have taken place there, whether its soil or water is contaminated, and the status of its permits and violations. The goal is to understand what you are taking on before signing, not afterward.

The international standard ISO 14015 calls this work “environmental due diligence assessment”: a systematic process that identifies the environmental aspects, issues, and conditions of a site or facility and their implications for the transaction. This guide explains the stages, the documents to request, when sampling is needed, and how to protect yourself in the contract.

Why Assess the Site Before Signing?

Contamination is not apparent during a routine inspection. A site that looks clean may conceal leakage from an old tank or chemical residues below the surface. When contamination is discovered later, the first question is: who caused it? The answer requires evidence.

  • The violator is responsible for remedying the damage: Article 43 of the Environment Law requires the violator to remedy the effects of the violation, carry out rehabilitation, and pay compensation. A report documenting the site's condition on the date you take possession provides evidence that the contamination predates your operations.
  • Waste left on the site: The Waste Management Law holds waste producers and service providers civilly and criminally liable for damage caused by their waste, and makes anyone who hands over waste to an unlicensed party jointly and severally liable with that party.
  • Permits and violations: The site may have a permit that needs amendment, unresolved violations, or a previous activity that operated without a permit.
  • Remediation costs: Remediating contaminated soil is a lengthy and costly undertaking. Identifying the need early can change the price or your decision.

Stages of an Environmental Site Assessment

StageWhat It InvolvesOutcome
1. Document reviewSite use history, permits, monitoring reports, violations, and waste recordsA list of potential risks and their locations
2. Site visit and interviewsInspecting the site and its surroundings, and asking the operator and workers about tanks, storage, and incidentsConfirmation or exclusion of potential risks
3. Sampling investigation (when needed)Collecting soil or groundwater samples in suspect areas and analyzing them at a licensed laboratoryMeasured values to compare against regulatory standards
4. Report and recommendationCompiling findings and assessing their implications for the transactionA recommendation to proceed, negotiate, include contractual conditions, or withdraw

The first two stages form the core of due diligence under ISO 14015. The standard itself does not cover intrusive field investigations or remediation. The third stage is therefore determined by the findings of the first two stages, rather than being undertaken automatically.

Documents to Request from the Seller or Landlord

  • The current environmental permit, previous permits, and the activity category.
  • Environmental monitoring reports submitted to the Center.
  • Inspection and violation records, including the actions taken.
  • Records of waste transfers to licensed transporters.
  • The locations of current and former underground tanks, and their inspection records.
  • A list of chemicals and hazardous materials stored on the site historically.
  • Any previous environmental studies: impact assessments, audits, or soil analyses.
  • Environmental incident records: spills, leaks, or fires.

A seller's refusal to provide these documents is informative in itself and should be factored into your assessment.

What Should You Look for During the Site Visit?

  • Oil stains or discolored soil, especially near storage and loading areas.
  • Fill ports or vent pipes indicating undisclosed underground tanks.
  • Abandoned drums or containers, and buried or stockpiled waste.
  • Floor drains that discharge into a pit or directly into the soil.
  • Wells on or near the site, because contamination may reach groundwater.
  • The site's surroundings: contamination from a neighboring activity may migrate onto your site.

When Do You Need Soil and Water Samples?

When the first two stages reveal an indicator: a previous activity involving fuel or chemicals, underground tanks, a recorded incident, or signs observed during the site visit. Results are compared against the standards in Annex (1) of the Implementing Regulations for the Prevention and Remediation of Soil Pollution, which vary by soil type and land use. For details, read the Soil Analysis Guide.

Examples by Site Type

Previous Site UseKey Items to Investigate
Gas stationUnderground tanks and connecting lines, and hydrocarbons in the soil
Auto repair shopOil change and storage areas, drains, and heavy metals
Chemical or paint factoryStorage and loading areas, solvents, and spill history
WarehouseWhat was stored there historically, not just what is stored there now, and generator and fuel areas
Agricultural land intended for an industrial projectPesticide mixing and storage areas, and wells

If the Site Has an Existing Environmental Permit

Buying an operating facility is different from buying land. The permit is issued for the activity as described, and any change after taking possession requires approval. The permitting platform offers services relevant to this situation: “Amend Facility and Add Authorized Representatives” to update facility and authorized representative details, “Register a Previous Environmental Permit” for previously issued permits, and “Amend Environmental Permit” if you change the activity. Read Facility Ownership Transfer and the Environmental Permit and Environmental Permit Amendment.

What Does the Assessment Report Include?

  • A description of the site, its boundaries and surroundings, and its use history as established through documents and interviews.
  • A list of the documents reviewed and those requested but not provided.
  • Site visit observations, with photographs and locations marked on a plan.
  • Sampling results, if samples were taken, their comparison against the appropriate standard, and the laboratory's license.
  • A risk assessment: what is confirmed, what is possible, and what requires further investigation.
  • The recommendation, its implications for the transaction, and proposed contract provisions.

Who Conducts the Assessment?

An organization independent of the seller, with experience in industrial activities and soil and water contamination. Any necessary analyses are performed by a laboratory licensed by the National Center for Environmental Compliance to conduct laboratory analyses, because results from an unlicensed laboratory will not be accepted if you later need to submit them to an official authority. Do not rely solely on a report provided by the seller without having it reviewed.

How Can You Protect Yourself in the Contract?

  • Make the assessment a condition: Completion of the transaction should be conditional on a report that reveals no contamination, or on resolving any contamination it identifies.
  • Establish the baseline: Attach the assessment report to the contract as a record of the site's condition on the date you take possession.
  • Define responsibility for preexisting contamination: Specify who bears responsibility for remediating contamination discovered later that predates your possession of the site.
  • For leases: Document the condition when you take possession and when you hand the site back, so you are not held responsible for a previous tenant's contamination and your successor is not held responsible for yours.

Drafting these clauses is legal work. The environmental assessment provides the lawyer with the facts on which to base them.

Common Mistakes

  • Relying only on a visual inspection: Subsurface contamination cannot be seen.
  • Random sampling: A sample from the middle of the site tells you nothing about the tank area.
  • Overlooking the surroundings: A neighboring polluting activity may become your problem.
  • Assessing after signing: The assessment's real value comes before you commit, not afterward.

Pre-Signing Checklist

  • I have identified the site's previous activities and when they took place.
  • I have obtained the permits, monitoring reports, and inspection records.
  • I have identified the locations of current and former underground tanks.
  • I have visited the site and its surroundings and spoken with the operator and workers.
  • I have determined whether sampling is needed based on clear indicators.
  • I have attached the report to the contract and defined responsibility for preexisting contamination.

How Can Abak Green Help?

We review the site's environmental documents, inspect the site and its surroundings, design a sampling plan when needed, and coordinate sample analysis through an accredited laboratory. We then prepare a clear report describing the site's condition and risks and recommend the next step. If remediation is required, we prepare a rehabilitation plan.

Environmental Consulting · Rehabilitation Plans and Contaminated Soil Remediation · Send the property's location and previous activity for a preliminary review

Frequently Asked Questions

What is an environmental site assessment?

A systematic review of a site's environmental condition before purchase or lease: its use history, permits, violations, and any potential contamination in its soil or water.

Is soil analysis required for every assessment?

No. Sampling is determined through document review and the site visit when there is an indicator such as a previous activity involving fuel or chemicals, or underground tanks.

Who is responsible for preexisting contamination discovered after purchase?

The Environment Law requires the violator to remedy the effects and carry out rehabilitation. Proving that contamination predates your possession requires a report documenting the site's condition on the date you take possession, along with a clear contractual clause.

What is the international standard for environmental site assessments?

ISO 14015:2022, which provides guidance on environmental due diligence assessment for sites and organizations.

What documents should I request from the seller?

Environmental permits, monitoring reports, inspection and violation records, waste records, tank locations, and previous environmental studies.

Do I need an assessment when leasing a site?

Yes, if the site was used for an activity that could cause contamination. Documenting its condition when you take possession protects you from being held responsible for a previous tenant's contamination.

What should I do about the environmental permit when buying an operating facility?

Update the facility and authorized representative details through the “Amend Facility and Add Authorized Representatives” service, and request a permit amendment if you change the activity.

What is the difference between an environmental site assessment and an environmental impact assessment study?

A site assessment describes the condition and risks of an existing site before a transaction. An impact assessment study predicts the impacts of a new project before construction and is submitted to the Center as part of the permitting process.

Who conducts an environmental site assessment?

An organization independent of the seller with experience in industrial activities and contamination, with analyses performed by a laboratory licensed by the Center to conduct laboratory analyses.

Official Sources