Environmental permit modification is a request a facility submits to the National Center for Environmental Compliance when its permitted activity changes through expansion, a change in design or operation, or the addition of a new activity at the same site. The rule is simple: the permit covers the activity as described when it was issued, and any subsequent major change requires the Center's approval before implementation, not afterward.

This guide explains when a change is considered major, the difference between the permit modification service and the activity addition service, the requirements for each by activity category, and the fine for making modifications without approval.

When Do You Need to Modify an Environmental Permit?

The Executive Regulations for Environmental Permits define a “major change” as “any expansion or change in the design, operation, or nature of an existing activity that may have an adverse impact on the environment.” Article 2 states that the regulations apply to new and existing activities, including construction, operation, modification, addition, expansion, and closure.

The criterion is therefore not the size of the change, but its potential environmental impact. Examples of changes likely to be considered major include:

  • Increasing production capacity or adding a production line.
  • Introducing new raw materials or chemicals into the process.
  • Adding an emission source, such as a stack, furnace, or large generator.
  • Changing the wastewater treatment method or discharge location.
  • Expanding the site itself or relocating part of the activity within it.

Changing the facility's details or its authorized representative is not a change to the activity. A separate administrative service handles these changes, as explained below.

Permit Modification, Activity Addition, or a New Permit?

The Center offers different services depending on the type of change. Choosing the wrong service means the application will be rejected or returned:

Type of ChangeService on the Permits Platform
Change to a permitted activity (design, operation, or capacity)Environmental Permit Modification
New activity added to a permitted facility, or expansion involving a different activityActivity Addition
Change to facility details, addition of authorized representatives, or updates to their permissionsFacility Modification and Addition of Authorized Representatives
New activity at a separate siteActivity classification, followed by a construction permit and then an operating permit

Requirements for the Modification Service

According to the Center's official service page, requirements depend on the type of modification and what the Center requests. The core requirements are:

  • A valid environmental permit.
  • An application explaining the type, reasons, and scope of the modification.
  • Supporting plans and regulatory and technical documents.
  • Any other requirements the Center considers necessary to modify the permit.

The service page does not specify a fixed processing time. The actual timeline depends on the completeness of the application and the studies the Center requests for the modification.

Requirements for Adding an Activity by Category

The activity addition service begins with general requirements: an environmental classification form for the added activity; one official document (the investor's identification, commercial registration, or unified number for government entities without a commercial registration); the activity site's address; a valid permit when requesting expansion, modification, or addition; and payment of the applicable fee. Technical requirements then depend on the category of the added activity:

Category of the Added ActivityTechnical Requirement
Category 1An environmental management plan and a rehabilitation plan for activities for which Annex (4) of the regulations requires one
Category 2A Category 2 environmental impact assessment study and an undertaking to implement its findings and recommendations
Category 3A scoping report first, followed by a Category 3 impact assessment study after the Center approves the scope, and an undertaking

The fee listed on the service page is SAR 500, followed by any fees specified in the Executive Regulations for Fees. Note that the added activity's category may differ from that of your original activity: a Category 1 workshop adding a Category 2 activity needs an impact assessment study for that activity. For details on the form, read The Environmental Classification Form: A Step-by-Step Guide.

How Should You Describe the Change in Your Application?

A vague description such as “factory expansion” is one of the most common causes of delays in modification applications. The Center needs to see the facility before and after the change. Prepare a table covering these items:

ItemBefore the ChangeAfter the Change
Production capacityAs stated in the current permitNew capacity
Raw materials and chemicalsCurrent list and quantitiesAdditions or changes
Equipment and emission sourcesExisting stacks, furnaces, and generatorsNew ones and their locations
WasteTypes, quantities, and receiving entitiesNew types and quantities
WastewaterQuantities and treatment methodChanges to both
LayoutCurrent site layoutLayout after the change

This same table becomes the basis for the required study and for updating the environmental management plan after approval.

Application Steps

  1. Describe the change precisely before anything else: what will change, where, when, and what new materials and equipment will be involved.
  2. Select the correct service from the table above, and determine the added activity's category if you are adding an activity.
  3. Have the required study prepared by a service provider licensed by the Center.
  4. Submit the application through the Permits and Licenses Platform: select the service, complete the form, attach the documents, and submit.
  5. Do not begin implementation until the Center issues its approval.
  6. Update your environmental management plan and records after approval so they reflect the facility as it now operates.

Examples by Activity

  • A factory adding a production line: if the line uses the same product and materials, it is a permit modification. If it involves a different product and new materials, it may be an added activity with its own classification.
  • A workshop adding a painting section: painting introduces solvents and emissions that were not part of the original activity. Read Environmental Requirements for Paint and Auto Body Shops.
  • A warehouse starting to store chemicals: this changes the nature of the activity, even if the building remains unchanged.
  • A restaurant becoming a central kitchen serving multiple branches: increases in capacity, waste, and wastewater change the scale of the impact.
  • A facility changing its authorized representative: this is not an activity modification; it falls under the “Facility Modification and Addition of Authorized Representatives” service.

Fine for Modification Without Approval

The amended schedule of violations under the Executive Regulations for Environmental Permits treats “making any modification or addition to any permitted activity without obtaining the Center's approval” as a separate violation:

Category 1Category 2Category 3
SAR 5,000SAR 20,000SAR 50,000

In addition to the fine, the violator must rectify the violation and repair the damage. For other violations, read The Guide to Environmental Violations and Fines.

Common Mistakes

  • Implementing first, then applying: purchasing and installing equipment before submitting the application puts the facility in violation, even if approval is issued later.
  • Treating renewal as an opportunity for modification: renewing an operating permit renews the activity as it is. A change requires its own service. Read The Environmental Permit Renewal Guide.
  • Understating the change: describing an expansion as smaller than it is to avoid a more extensive study may result in inaccurate information, which is a serious violation.
  • Leaving the added activity out of the plan: approval is not enough if the environmental management plan and records still describe the facility before the change.

Checklist Before Making Any Change to Your Facility

  • Does the change affect the activity's design, operation, nature, or scale?
  • Does it introduce new raw materials, chemicals, emission sources, or wastewater discharges?
  • Is it a modification to an existing activity or the addition of a new one?
  • What is the added activity's category, and what study does it require?
  • Is the current permit valid?
  • Does the project schedule allow time for the study and approval before implementation?

How Can Abak Green Help?

We work with you to identify the type of change and the correct service, prepare the classification form for the added activity and the environmental management plan or Category 2 environmental impact assessment study, manage the Category 3 application file, follow up on the application through approval, and then update your plan and records.

Obtaining an Environmental Permit · Send a description of the change for a preliminary review

Frequently Asked Questions

When do I need to modify an environmental permit?

For any expansion or change in an activity's design, operation, or nature that may have an adverse environmental impact. The regulations call this a “major change.”

What is the difference between permit modification and adding an activity?

Modification applies to a change in a permitted activity, while addition applies to a new activity added to a permitted facility. Addition requires a classification form for the added activity and fulfillment of its category-specific requirements.

What documents are required to modify an environmental permit?

A valid permit; an application explaining the type, reasons, and scope of the modification; supporting plans and documents; and anything the Center requests based on the type of modification.

How much does it cost to add an activity to an environmental permit?

The fee listed on the activity addition service page is SAR 500, followed by any fees specified in the Executive Regulations for Fees according to the activity.

What is the fine for modification without the Center's approval?

SAR 5,000 for Category 1, SAR 20,000 for Category 2, and SAR 50,000 for Category 3, with the violator also required to rectify the violation.

Does changing the authorized representative or facility details require a permit modification?

No. There is a separate service called “Facility Modification and Addition of Authorized Representatives,” which requires the commercial registration or unified number, the representative's identification, and the authorization document.

Can a modification be made when renewing the permit?

Renewal renews the activity as it is. Any major change requires a separate application for modification or activity addition.

We previously carried out an expansion without approval. What should we do?

Stop any further expansion and submit a modification or addition application with an accurate description of what was implemented. Do not wait for an inspection to discover it. The fine applies to modifications made without approval, but allowing the situation to continue without applying makes it harder to resolve.

Do I need a new study to add an activity?

It depends on the added activity's category: an environmental management plan for Category 1, an impact assessment study for Category 2, and a scoping report followed by an impact assessment study for Category 3.

Official Sources