A company's water footprint measures the amount of water its activities consume or pollute and the associated environmental impact, both within its facilities and across its supply chain. It is to water what a carbon footprint is to emissions: a figure that informs a reduction plan and is disclosed in a sustainability report.
In a country where facilities rely on costly desalinated water or groundwater, the water footprint becomes more than an environmental indicator—it becomes a direct cost item. This guide explains how it differs from the carbon footprint, the two measurement approaches, the data required, sector-specific examples, and ways to reduce it.
Water Footprint vs. Carbon Footprint: What Is the Difference?
| Carbon Footprint | Water Footprint | |
|---|---|---|
| What it measures | Greenhouse gas emissions | Water consumption, pollution, and their impacts |
| Unit | Metric tons of carbon dioxide equivalent | Cubic meters of water, or an impact indicator depending on the methodology |
| Importance of location | A metric ton of emissions has the same impact regardless of location | A cubic meter in a water-scarce area has a greater impact than one in a water-abundant area |
| International reference | GHG Protocol and ISO 14064 | ISO 14046 |
The third difference in the table is the most important: water impacts cannot be understood without knowing the activity's location and water source. To measure your emissions, read our guide to corporate carbon footprints.
Two Measurement Approaches
The Volumetric Approach: Blue, Green, and Gray
The Water Footprint Network developed this approach, which divides water into three colors:
- Blue: Surface water and groundwater consumed—that is, water that does not return to its source because it evaporates or is incorporated into a product.
- Green: Rainwater stored in the soil and consumed, primarily relevant to agriculture.
- Gray: The amount of clean water needed to dilute pollutants in wastewater to acceptable standards.
Its advantage is simplicity: figures in cubic meters that everyone can understand. Its drawback is that it does not distinguish between a cubic meter from a water-scarce area and one from a water-abundant area.
The Impact-Based Approach: ISO 14046
The international standard ISO 14046 assesses water footprints for products, processes, and organizations based on life cycle assessment. It goes beyond water volumes to measure the potential environmental impacts associated with water and changes in its quality. An assessment conforming to this standard can stand alone or form part of a broader environmental assessment.
For a company getting started, the volumetric approach is easier for managing consumption internally, while the ISO 14046 approach is more suitable when an internationally recognized assessment is required.
What Is Included in the Calculation?
| Component | Examples | Data Source |
|---|---|---|
| Direct consumption | Water for processes, cooling, washing, facilities, and irrigation | Water bills, well meters, and volumes of purchased desalinated water |
| Water consumed without returning | Cooling tower evaporation and water incorporated into products | The difference between incoming and discharged water |
| Wastewater and its quality | Industrial and sanitary wastewater, and desalination brine | Wastewater meters and wastewater quality testing |
| Supply chain | Water associated with purchased raw materials, such as agricultural products and paper | Supplier data or estimates from life cycle databases |
Steps to Calculate Your Company's Water Footprint
- Define the goal and scope: Is the purpose internal management or disclosure in a sustainability report? Which sites will the calculation cover?
- Map water flows: Identify where water enters, where it is used, and where it leaves, with a meter reading or estimate for each point.
- Select a baseline year and collect a full twelve months of data.
- Calculate consumption for each use: processes, cooling, facilities, and irrigation.
- Measure wastewater quality through a licensed laboratory if wastewater is within the scope.
- Decide whether to include the supply chain or exclude it, explaining the reason.
- Calculate an intensity indicator: Water per unit of production, per square meter, or per employee, so you can compare performance across years.
- Set reduction targets relative to the baseline year and review them annually.
Examples by Sector
- Food or beverage plant: Water is incorporated into the product itself and used for washing and sanitizing. The agricultural supply chain's water footprint is often larger than the plant's own consumption.
- Plant that relies on cooling: Cooling tower evaporation is the largest component of water consumed without returning.
- Hospital: Continuous consumption for sterilization, washing, and air conditioning, along with wastewater that requires treatment.
- Car wash: Washing is the entire operation, and a water recycling unit offers the greatest reduction opportunity. Read our car wash requirements.
- Hotel or residential complex: Facilities, irrigation, and swimming pools. If it has a desalination unit, the brine is part of its footprint. Read about environmental permits for desalination plants.
Water Withdrawn, Consumed, and Discharged: Three Figures, Not One
| Figure | What It Means | Example |
|---|---|---|
| Withdrawn | All water entering the facility | Water from the supply network, wells, tankers, and desalination |
| Discharged | Water leaving the facility and entering the sewer network or environment | Sanitary and industrial wastewater, and brine |
| Consumed | The difference between the two: water that does not return | Evaporation, water incorporated into products, and irrigation |
Two facilities withdrawing the same amount of water may have very different footprints: one returns most of the water after treatment, while the other evaporates it in cooling towers.
Who Holds the Data Within the Company?
Water data is spread across departments: finance holds the bills, facilities management holds meter readings, operations or maintenance holds wastewater data, and procurement holds raw material data. Assign one person to collect it every month using a standardized template; otherwise, preparing the first report will become a search for missing figures.
How Can You Reduce Water Consumption and Impact?
- Submeters: You cannot reduce what you do not measure. A meter for each major use reveals where water is being wasted.
- Repair leaks in the internal network, as this waste may only become apparent on the bill.
- Reuse treated water for irrigation, cooling, and washing where requirements permit. Read about industrial wastewater treatment before discharge.
- Improve cooling tower efficiency and optimize cleaning cycles.
- Reduce pollution at the source, because cleaner wastewater reduces both the gray water footprint and treatment costs.
- Engage suppliers of water-intensive materials.
Water in Sustainability Reporting
Water is covered by disclosure frameworks: the Saudi Exchange's Environmental, Social, and Governance Disclosure Guidelines list “water stress” among common environmental topics, and the GRI Standards dedicate a standard to water and effluents. This calculation therefore directly supports the environmental component of your report. Read our guide to sustainability reporting and ESG.
Common Mistakes
- Relying only on the water utility bill: The bill does not cover wells or desalinated water purchased by tanker.
- Overlooking wastewater: The calculation covers not only what enters the facility, but also what leaves and its quality.
- Comparing absolute figures: Increased production raises consumption. The intensity indicator is what reveals improvement.
- Changing methodologies between years: Changing the calculation method makes comparison with the baseline year meaningless.
Key Terms
- Water withdrawn: All water entering the facility from any source.
- Water consumed: The portion that does not return to its source, such as water that evaporates or is incorporated into a product.
- Water stress: Pressure from demand on limited water resources in an area.
- Life cycle assessment: An assessment of the environmental impact of a product or process from raw materials through the end of its life; it forms the basis of ISO 14046.
How Can APAC Green Help?
We compile water indicators for the environmental component of your sustainability report, alongside carbon footprint, waste, and energy data. We also coordinate wastewater quality testing through an accredited laboratory and link these activities to your environmental permit obligations.
Carbon Footprint Calculation and ESG Sustainability Reporting · Request a review of your facility's water indicators
Frequently Asked Questions
What is a company's water footprint?
It is a measure of the amount of water a company's activities consume or pollute and the associated environmental impact, within its facilities and across its supply chain.
What is the difference between a water footprint and a carbon footprint?
A carbon footprint measures greenhouse gas emissions, while a water footprint measures water consumption and pollution. Water impacts depend on the activity's location and water source.
What is the international standard for water footprints?
ISO 14046, which assesses water footprints for products, processes, and organizations based on life cycle assessment.
What do blue, green, and gray water footprints mean?
Blue refers to surface water and groundwater consumed; green refers to rainwater consumed from the soil; and gray refers to the water needed to dilute pollutants to acceptable standards.
How do I start calculating my company's water footprint?
Start by mapping water flows through the facility and collecting twelve months of bill and meter data, then calculate consumption for each use and an intensity indicator.
Is the water footprint part of a sustainability report?
Yes. Water is an environmental topic in disclosure frameworks, including the Saudi Exchange's guidelines and the GRI Standards.
How can a company reduce its water footprint?
By installing submeters to identify waste, repairing leaks, reusing treated water, improving cooling efficiency, and reducing pollution at the source.
Is desalinated water included in the water footprint?
Yes. Desalinated water purchased or produced on-site is part of water withdrawn, and brine is part of wastewater discharge.