An Environmental Management Plan (EMP) sets out the procedures a facility commits to following to maintain environmental compliance. It is the primary requirement for a construction permit for Category I activities and part of the operating permit requirements.
Many people look for a ready-made “environmental management plan template.” A template is useful for understanding the structure, but keep two points in mind: the plan must be prepared by an environmental service provider licensed by the Center, and a generic template will not be accepted unless it is tailored to your activity and location.
Environmental Management Plan Template Structure
| # | Section | What to Include |
|---|---|---|
| 1 | Facility Information | Name, commercial registration, location and coordinates, activity, and classification category |
| 2 | Service Provider Information | Name and license number issued by the Center |
| 3 | Activity Description | Processes, raw materials and quantities, energy and fuel, operating hours, and number of employees |
| 4 | Site and Surroundings Description | Surrounding areas and sensitive receptors (homes, schools, hospitals, water bodies), with a map |
| 5 | Environmental Aspects and Impacts | For each component: air, noise, water and wastewater, soil, waste, and odors |
| 6 | Mitigation Measures | A specific, practical measure for each impact |
| 7 | Environmental Monitoring Plan | What is measured, where, how often, who is responsible, and which limit it is assessed against |
| 8 | Waste Management | Types, quantities, storage, and licensed receiving entities |
| 9 | Environmental Emergency Plan | Scenarios, response procedures, responsibilities, and contact numbers |
| 10 | Roles and Responsibilities | Who implements each measure |
| 11 | Training | Employee training on implementing the plan |
| 12 | Records | Required documentation forms |
| 13 | Budget and Timeline | Implementation costs and schedule |
Sample Entries in an Impacts and Mitigation Measures Table
| Component | Source | Impact | Mitigation Measure | Indicator | Frequency | Responsible Person |
|---|---|---|---|---|---|---|
| Air | Standby diesel generator | Emissions | Regular maintenance and an exhaust stack of appropriate height | Emission measurements | As specified in the permit requirements | Maintenance officer |
| Waste | Used oils from maintenance | Soil contamination | Store in sealed drums within secondary containment and hand over to an entity licensed by MWAN | Handover documents | At each handover | Warehouse officer |
For illustration only; the details are developed according to each facility's activity.
Sample Entries for Different Activities
| Activity | Impact | Mitigation Measure | Indicator |
|---|---|---|---|
| Auto Repair Workshop | Oil leakage onto floors and into drains | Impermeable flooring, secondary containment for drums, and an oil interceptor | Interceptor cleaning log and oil handover documents |
| Chemical Warehouse | Spills during loading | A loading area with secondary containment, absorbent materials, and employee training | Spill and training records |
| Restaurant or Central Kitchen | Grease in wastewater | A grease trap and collection of used cooking oil | Trap cleaning log and quantities of oil handed over |
| Construction Site | Dust affecting neighbors | Cover materials, spray water, and stabilize access routes | Documented daily inspections |
Note that every indicator can be verified through a record. If you cannot show the inspector evidence of a measure, the inspector will consider it unimplemented.
Monitoring Log Template
The plan specifies what to monitor, and the log proves that monitoring took place. Its simplest form is a table with these columns:
| Date | Item | Reading or Observation | Compliant? | Action if Noncompliant | Responsible Person |
|---|---|---|---|---|---|
| … | Oil interceptor cleaning | Completed; the collected quantity was handed over to a licensed transporter | Yes | — | Workshop supervisor |
| … | Secondary containment inspection | Crack in the corner | No | Repair within one week and reinspect | Maintenance officer |
Common Mistakes That Cause Plan Rejection or Delays
- A copied generic template that does not describe the facility's actual processes.
- Generic mitigation measures such as “comply with regulations” instead of a specific, verifiable measure.
- A monitoring plan without numerical details: it does not specify what is measured, the limit, or the frequency.
- Omitting sensitive receptors around the site.
- No emergency plan.
- Preparation by an unlicensed entity, which is grounds for outright rejection.
Construction Plan vs. Operating Plan: What Is the Difference?
| Construction-Phase Plan | Operating-Phase Plan | |
|---|---|---|
| When to Submit | With the Category I construction permit application | With the Category I operating permit application, in updated form |
| What It Covers | Construction work: dust, noise, waste, and equipment | Daily operations: emissions, wastewater, waste, and hazardous materials |
| Accompanying Documents | A rehabilitation plan for activities for which the regulation requires one, and an undertaking to implement it | An undertaking to implement the plan's findings and recommendations |
| At Renewal | Not applicable | Updated if anything at the facility has changed |
A common mistake is submitting the same construction plan when applying for an operating permit. The Category I operating permit service page explicitly requires an updated operating plan.
Waste Management Within the Plan
The waste section receives the most scrutiny in practice. Present it as a table covering each waste type:
| Type | Temporary Storage Location | Receiving Entity | Evidence |
|---|---|---|---|
| General Waste | Covered containers | Licensed service provider | Contract and invoices |
| Recyclables | Separate containers by material type | Licensed recycler | Handover documents |
| Hazardous Waste (Oils, Solvents, Batteries) | Roofed area with secondary containment | Licensed hazardous waste transporter | A transfer document for each handover |
Training and When to Review the Plan
The plan will not be implemented if the people responsible for carrying it out are unfamiliar with it. Specify who receives training, on what topics, and when: orientation for new employees, practical training on spills and emergencies, and periodic refreshers.
Review the plan when processes, equipment, or materials change, after any environmental incident, and when renewing the permit. A plan that has remained unchanged for years at a facility that has changed no longer describes that facility.
Plan Appendices
The appendices turn the plan from a written document into a verifiable file:
- A map of the site and its surroundings showing sensitive receptors.
- A facility layout showing drainage routes and storage areas.
- A list of hazardous materials and safety data sheets for each.
- Waste service providers' contracts and licenses.
- Blank record forms to be used.
- The license of the service provider that prepared the plan.
Pre-Submission Checklist
- The plan was prepared by a service provider licensed by the Center, and its license number is included.
- The processes, materials, and equipment listed are those actually present at your facility.
- Each impact has a specific measure, and each measure has an indicator, a frequency, and a responsible person.
- Sensitive receptors around the site are identified on a map.
- The emergency plan covers spills, fires, and leaks.
- Record forms are ready, and those responsible for them know their responsibilities.
- The facility can actually implement everything in the plan.
After Plan Approval
The approved plan is binding. Violating its requirements carries a fine of SAR 500 per requirement for Category I, SAR 2,000 for Category II, and SAR 5,000 for Category III. The Center may monitor its implementation throughout the activity's lifetime. Therefore, include only what you can actually implement.
Request the Template
Button: Request the Environmental Management Plan Template ← Opens the contact form until the downloadable template is ready.
How Can Abak Green Help?
As a Category B environmental service provider licensed by the National Center, we prepare an environmental management plan tailored to your facility's activity and location, follow it through to approval, and explain to your team how to implement it.
Environmental Management Plan · Request a Plan for Your Facility
Frequently Asked Questions
Can I use a ready-made environmental management plan template?
A template illustrates the structure, but the plan must be tailored to your activity and location and prepared by a licensed service provider.
What sections does an environmental management plan include?
Facility, activity, and site information; impacts and mitigation measures; a monitoring plan; waste management; emergencies; responsibilities; training; and records.
Who prepares an environmental management plan?
An environmental service provider licensed by the National Center for Environmental Compliance.
Is the plan binding after approval?
Yes. Violating its requirements carries a fine for each requirement.
Who prepares an environmental management plan for submission to the Center?
An environmental service provider licensed by the National Center for Environmental Compliance, in accordance with the requirements on the Category I construction and operating permit service pages.
Do I need a new plan when renewing the permit?
For Category I activities, the operating plan is updated at renewal if the facility has changed, according to the operating permit renewal service page.
What is the difference between a construction plan and an operating plan?
The first covers construction work and is submitted with the construction permit application. The second covers daily operations and is submitted in updated form with the operating permit application.
What should be included in the plan's waste section?
Each waste type, its temporary storage location, the licensed entity receiving it, and the document proving handover.
Can one facility's plan be used for another facility with the same activity?
No. The location, equipment, materials, and surroundings differ. The plan must describe the facility for which it is submitted, not the activity in general.