Reverse osmosis (RO) is the most widely used desalination technology today, from large coastal plants to small units that desalinate well water on farms, in factories, and in residential complexes. Yet every desalination plant, large or small, produces something consumers do not see: concentrated brine and the chemicals used in operation and cleaning. This makes desalination an activity with an environmental impact that requires a permit.
Environmental Permits for Desalination Plants: Who Licenses Them?
| Authority | What It Regulates |
|---|---|
| Saudi Water Authority | Desalinated water production, purified water production, water transmission and distribution, and other water service activities that require an electronic license |
| National Center for Environmental Compliance | Environmental permits for plant construction and operation |
| Permanent Committee for the Protection of the Coastal Environment | Coastal projects involving land reclamation or dredging within 400 meters of the shoreline |
| National Center for Waste Management (MWAN) | Plant waste: damaged membranes, chemicals, and sludge |
The Saudi Water Authority publishes a list of licensed entities, including licenses for activities such as “desalinated water production” and “purified water production for drinking water coolers.”
Environmental Impacts of Desalination Plants
1. Brine The greatest environmental challenge. Reverse osmosis produces fresh water and a much more saline brine stream, which may also contain residual treatment chemicals.
| Plant Location | Typical Disposal Method | Environmental Risk |
|---|---|---|
| Coastal | Discharge to the sea through engineered outfalls | Localized increases in salinity and impacts on coral reefs and marine organisms |
| Inland (well water) | Evaporation ponds, deep injection, or discharge to the sewer network if permitted | Soil and groundwater salinization |
2. Chemicals Antiscalants, disinfectants, and chemicals used for periodic membrane cleaning (CIP). Their residues constitute chemical waste that may be hazardous.
3. Water Intake Seawater intakes may draw in small marine organisms, and their design affects the extent of the impact.
4. Energy and Emissions Desalination is energy-intensive and therefore contributes to the carbon footprint.
5. Noise High-pressure pumps are a source of noise and are subject to the limits set by the Executive Regulation on Noise.
Environmental Regulatory Framework for Desalination Plants
- Executive Regulation on Environmental Permits: Construction and operating permits according to the activity category .
- Executive Regulation for the Protection of Aquatic Environments from Pollution: Regulates discharges into aquatic environments; violations include failure to comply with standards before discharge.
- Executive Regulation of the Environment Law for the Sustainable Management of Marine and Coastal Environments: Applies to coastal plants .
- Executive Regulation for the Prevention and Remediation of Soil Pollution: Applies to evaporation ponds and inland plants.
- Proximity to Sensitive Areas: An activity within an environmentally sensitive area, or within 500 meters of one, requires a detailed impact assessment study. Sensitive areas identified in the regulations include seashores, mangroves, coral reefs, and aquifers.
Water Discharge Permits: A Service Many Plants Overlook
In addition to construction and operating permits, the National Center for Environmental Compliance offers a separate service called the Water Discharge Permit. Desalination plants inherently generate discharges: brine and water from washing membranes and filters. The official service page requires:
- A discharge permit application form.
- A technical discharge study.
- Certified analytical results from a licensed service provider.
- Any additional requirements the center considers necessary based on the type of discharge.
After operations begin, environmental monitoring reports are submitted through a separate service on the platform. The report is prepared by a licensed consulting service provider, while monitoring and analyses are performed by service providers licensed in their respective fields. Each provider's license is attached to the report.
Steps to Obtain an Environmental Permit for a Desalination Plant
- Identify the location and water source: Seawater or wells? What sensitive areas surround the site?
- Determine the brine disposal method before finalizing the design, as this is the most important aspect of the assessment.
- Complete the environmental classification form with details on production capacity, brine, chemicals, and energy.
- Prepare the study required for the category: An environmental management plan or an impact assessment study that includes brine dispersion modeling for coastal plants when needed.
- Coordinate with the Saudi Water Authority on licensing the activity, and with the coastal areas committee when land reclamation or dredging is involved.
- Submit the application and follow up on the permit.
- Monitor after operations begin: Brine quality, the discharge point, and chemicals.
Examples by Plant Size and Location
| Plant | Key Environmental Question | What to Prepare |
|---|---|---|
| Well-water desalination unit on a farm | Where does the brine go? | A disposal method that does not salinize the soil or allow brine to reach the aquifer |
| Desalination unit in a factory | Does the brine mix with industrial wastewater? | A single documented discharge route and treatment before discharge |
| Unit in a hotel or residential complex | Is the brine discharged to the sewer network? | Approval from the sewer authority and documentation of quantities and chemicals |
| Large coastal plant | The marine outfall's impact on reefs and marine life | An impact assessment study and periodic marine monitoring |
For wastewater at facilities that operate their own treatment plant alongside desalination, read Small Wastewater Treatment Plants.
Tips to Reduce Your Plant's Environmental Impact
- Design the marine brine outfall for rapid dispersion, away from reefs.
- Choose less harmful chemicals and document their quantities.
- Hand over membrane cleaning waste and damaged membranes to an entity licensed by MWAN.
- Consider solar energy to power the plant, especially at remote locations.
- Monitor groundwater quality around evaporation ponds at inland plants.
Common Mistakes in Desalination Plant Applications
- Designing the plant before deciding how to dispose of brine. Changing the disposal route after design is costly and may change the activity category.
- Assuming a small unit falls outside the regulatory framework. Unit size affects the category and requirements, but it does not eliminate the environmental impact of brine.
- Overlooking cleaning chemicals. Antiscalants and membrane cleaning solutions enter the discharged stream and must be documented.
- Using analyses from an unlicensed entity. Discharge analysis results are accepted only from a licensed service provider.
- Confusing the authority's license with the environmental permit. A Saudi Water Authority license for the activity does not replace the environmental permit issued by the center.
Pre-Application Checklist
- The water source and production capacity are defined.
- The brine disposal method is selected and justified.
- A list of the chemicals used and their estimated quantities is ready.
- The plant location and surrounding wells and sensitive areas are documented on a map.
- A licensed entity is identified to receive damaged membranes and cleaning waste.
- A discharge monitoring plan is in place for the operational phase.
Key Terms
- Reverse Osmosis: Forcing water under pressure through a membrane that retains salts, producing fresh water and concentrated brine.
- Brine: Water rejected by the membranes, with a higher salt concentration than the source water.
- Recovery Rate: The proportion of source water converted into fresh water. As it increases, brine volume decreases and its concentration rises.
- Antiscalants: Chemicals that prevent salt deposits on membranes and end up in the discharged stream.
How Can Abak Green Help?
We manage your desalination plant's environmental documentation: the classification form, an environmental management plan or a Category 2 environmental impact assessment study, a brine and chemical management plan, and follow-up through permit issuance, followed by periodic monitoring through an accredited laboratory.
Environmental Permit Applications · Environmental Impact Assessment Studies · Request a Consultation for Your Desalination Plant
Frequently Asked Questions About Desalination Plants
Does a small desalination plant for a factory or farm need an environmental permit?
Any activity with an environmental impact requires a permit, and brine has an environmental impact. The category is determined by capacity and location.
Who licenses desalination plants in Saudi Arabia?
The Saudi Water Authority licenses desalinated and purified water production activities, while the National Center for Environmental Compliance issues the environmental permit.
What is brine?
It is the highly saline water produced by desalination after fresh water is separated, and it is the greatest environmental challenge for these plants.
How is brine disposed of at inland plants?
Through methods such as evaporation ponds or deep injection, as approved in the study and permit, while protecting soil and groundwater.
Does a coastal plant need additional approvals?
Yes. Land reclamation or dredging within 400 meters of the shoreline requires approval from the Permanent Committee for the Protection of the Coastal Environment.
What should I do with membrane cleaning waste?
It is treated as chemical waste and handed over to an entity licensed by MWAN.
Does a desalination plant need a separate permit to discharge brine?
The center offers a separate water discharge permit service that requires a technical study and analytical results from a licensed service provider. The center determines the requirements for each case based on the type of discharge.
Who prepares monitoring reports for a desalination plant after operations begin?
A service provider licensed in environmental consulting prepares the reports, while monitoring and analyses are performed by service providers licensed in their respective fields.
Does a Saudi Water Authority license replace the environmental permit?
No. The authority licenses the water production activity itself, while the National Center for Environmental Compliance issues the environmental permit for plant construction and operation. The two sets of documentation are separate and are prepared together.
Official Sources
- Saudi Water Authority: Activities Requiring a License
- Saudi Water Authority: Licensed Entities
- Executive Regulation on Environmental Permits for the Construction and Operation of Activities (Umm Al-Qura)
- Ministry of Environment: Regulation for the Protection of Aquatic Environments from Pollution
- Executive Regulation for the Prevention and Remediation of Soil Pollution: Umm Al-Qura Gazette